Serving Customers World Wide: 1-800-363-0867  

PREVIOUS PAGE

CONTACT US

 Print This Page

SPECIFICATIONS 

1.0            GENERAL SCOPE:

1.1              The scope of work to be performed consists of designing, fabricating, delivering, pre-assembled equipment enclosure in accordance with this specification and drawings

2.0            MATERIALS AND CONSTRUCTION:

2.1              Design: pre-engineered fiberglass, self-supporting, trilateral modular buildings.  Building system is designed to withstand the maximum limits for wind and snow loads calculated according to the National Building Code of Canada and the Universal Building Code.   These maximum loads are: wind speed 120 mph, snow load of 100 lbs/sqft.  Roof slope is 3:12.

2.2              Modular Sections: All component sections are sidewall and end wall panels.  All components sections consist of a single molded piece made of solid fiberglass.  All component sections are rib stiffened.  All component sections have their own internal structural flange.  Molded interior flanges using adhesive and steel fasteners attach components.  All end component sections consist of one-piece ribbed sandwich panel construction.

2.3              Exterior Finish: All exterior surfaces are orthopthalic polyester laminate with high quality ultra violet inhibitors and fire retardant fillers.  Materials used meet both National Building Code of Canada and the Uniform Building Code as approved plastics material for construction.

2.4              Interior Finish:  Ceramic latex interior co polymer coating on all fiberglass surfaces for easy cleaning maintenance.

2.5              Caulking:  All exterior caulking is Adseal premium quality silicone sealant adhesive.  All roof seams are taped with 2” wide byutel roofing tape and sealed with a brush on silicone sealant coating.

2.6              Fastening:         All fasteners are 304 stainless steel.

Print This Page